Brief analysis of quality and transportation precautions of aluminum silicate needle punched blanket

    In modern times, with the rapid development of science and technology, building materials are also constantly updating their products, especially the currently popular insulation materials. There are many types of products. One of them is worth mentioning is the aluminosilicate needle punched blanket, which has Good toughness and tensile force, can be used for various pipe insulation measures.
 
     First of all, understand the formation of aluminum silicate needle punched blankets. It uses needle punching to make fiber-like thermal insulation cotton into a blanket shape. From the appearance, you can distinguish whether there are impurities or stains on the surface and test the pull抻 Performance, because good quality aluminum silicate needle punched blanket has certain toughness. If there is a drop phenomenon during drawing, it indicates that there is a problem with its quality, and it can also distinguish its color and yellowish products. Generally speaking, Will be slightly worse; Secondly, the quality of identification is to measure its volume according to the detection standard, such as each cubic weight of about 100 kg, up and down will not exceed 100 kg.      These identification methods are suitable for users to use in the field, which can roughly identify the quality of the product, but there may be omissions. More professional identification methods need to go to the prescribed testing unit to identify.
 
   Aluminum silicate fiber blanket is a rolled product with high tensile strength and is not easy to be damaged. It can be stacked when it is transported and loaded, that is, the products are stacked in a certain order and direction. Because the weight of the aluminum silicate fiber material is very light, there is no need to worry about overweight, just pay attention when loading the car, the height is lower than the body.
 
   Pay attention to changes in the climate and environment during the transportation of aluminum silicate fiber blankets. Although the aluminum silicate fiber refractory insulation material can withstand the high temperature test, if this product is wet, the quality will be affected. To prevent this from happening, it should be completely covered with canvas or other waterproof material on the outside of the body.
 
   In addition, in order to prevent other goods from squeezing the fiber blanket, it is recommended not to transport the fiber blanket with other types of goods in the same vehicle.